FURTHER PRODUCT INFORMATION
INSTRUCTIONS FOR USE:
The DLX P-50 undercoat plastering mix is supplied as a ready to use product. It cannot be mixed with other materials, diluted or thickened. Stir the mass directly before use to improve its consistency. Apply DLX P-50 on the substrate prepared in advance (evenly across the entire surface) using a roller or brush. Do not apply the mix at a temperature below +5°C. You can plaster the surface after the mix dries off completely, i.e. after about 4-6 hours from application.
CONSUMPTION:
An average consumption is about 0.2 L per 1 m2.
NOTE:
Protect eyes and skin. Seek medical advice on direct eye contact.
STORAGE AND TRANSPORT:
Transport and store in tightly closed original packaging (preferably on pallets), in dry conditions at over zero temperatures. Protect against overheating. Do not leave open containers.
PROTECT AGAINST FROST!
SHELF LIFE:
12 months from the manufacture date stated on the container.
PACKAGING:
5 L bucket; 72 bucket pallet, 360 L;
10 L bucket; 44 bucket pallet, 440 L.
TECHNICAL PARAMETERS
Ingredients: |
water dispersion of potassium silicates, synthetic resins and mineral fillers |
Colour: |
white or colour |
Density: |
about 1.4 kg/dm3 |
Application temperature: |
+ 50C to + 250C |
Drying time: |
about 4 hrs |
Consumption: |
About 0.2 L/m2 depending on the substrate absorption |
Technical specification: |
ETA 15/0311 dated 29/05/2015 |
Reviews
There are no reviews yet.